Foil Paste-Foil Paste
Home > Products > Foil Paste >
Foil Paste










1)Foil Paste (Hot)

Product Introduction
1. It is an acrylic polymer mixtures paste, which is used for hot stamping printing.
2. It is good operability without screen blocking. High glossy and excellent adhesion.
3. Suggest applying for cotton fabrics or cotton blends.
 
Technical Specifications
Appearance: Light yellow Paste
Iconicity: Anionic
PH: 7.0-7.5


Product Model
RT235 Foil Paste (hot)

Application
1. Suggest using 43T-47T mesh.
2. Direct prints RT235 Foil Paste for 3-4 times. When it is 80% dry, cover the foil paper, then press the front side 15 seconds at 150℃.
3. After cooling, press the back side 15 seconds at 150℃ and take away the foil paper.
4. Please remember to do curing at temperature 160℃ for 60-90 seconds and put for natural drying 24 hours before doing the wash testing.
 
Product Storage

1. In original containers Well-closed. 5℃(41℉)~40℃(104℉)
2. Storage time:12 months
 
Product packaging
20/50 kg/barrel
 







2)Foil Paste (Cold)

Product Introduction
1. It is an acrylic polymer mixtures paste, which is used for cold stamping printing.
2. It is good operability without screen blocking. High glossy and excellent adhesion.
3. Suggest applying for cotton fabrics or cotton blends.
 
Technical Specifications
Appearance: Light yellow Paste
Iconicity: Anionic
PH: 7.0-7.5


Product Model
U29 Foil Paste (Cold) U11A Foil Coating

Application
1. Suggest using 43T-47T mesh.
2. Direct prints U29 Foil Paste for 3-4 times. When it is 80% dry, cover the foil paper.
3. Adding some clear paste as lubrication, scratch several times, then remove the foil paper.
4. Cover U11A adding with CX-100 2% to print 1 time.
 
Product Storage

1. In original containers Well-closed. 5℃(41℉)~40℃(104℉)
2. Storage time:12 months
 
Product packaging
20/50 kg/barrel
 
R&T guarantees the products qualities. However all the recommendations are done without any responsibility because R&T cannot control the conditions of the applications.

上一篇:没有了
下一篇:没有了