Puff Paste-Puff Paste
Home > Products > Puff Paste >
Puff Paste










Product introduction
1. It is an acrylic polymer mixtures paste, which is used for Puff printing.
2. It is good operability without screen blocking. Strong 3D effect and excellent adhesion.
3. Suggest applying for cotton fabrics or cotton blends.
 
Technical Specifications
Appearance: Light yellow Paste
Iconicity: Anionic
PH: 7.0-7.5


Product Model
W-1000 Puff Paste (Medium Temp.) RT821 Puff Paste (High Temp.)

Application
1. Suggest using 43T-47T mesh.
2. Normally mix rubber paste (Puff Paste: Rubber Paste=4:6) then directly print 3 times. After drying, press 15 seconds at 140℃/160℃.
3. Please remember to do curing at temperature 140℃ for 3 minutes and put for natural drying 24 hours before doing the wash testing.
 
Product Storage

1. In original containers Well-closed. 5℃(41℉)~40℃(104℉)
2. Storage time:12 months
 
Product packaging
20/50 kg/barrel
 
R&T guarantees the products qualities. However all the recommendations are done without any responsibility because R&T cannot control the conditions of the applications.



 

上一篇:没有了
下一篇:没有了